Deox-Gel rust remover - 1kg
- Thick gel clings to vertical surfaces.
- Non-toxic and safe to use.
- Doesn’t require constant attention – frees-up valuable man-hours.
- Harmless, non-toxic and biodegradable.
- Produces clean bare-metal finish.
- Does not destroy or distort delicate steel.
- Harmless to glass, plastics, aluminium and chrome.
- Eliminates grit embedment – a recognised problem with blast cleaning that can cause premature coating failure.
Deox-Gel is a viscous, highly thixotropic, rust remover, designed for corrosion removal on surfaces or objects too large to submerge in a bath of Deox-C. Along with the viscosity builders and preservatives, the active agents in Deox-Gel are harmless, non-toxic and biodegradable.
A Comparison
Abrasive cleaning methods such as grinding, sanding or blast-cleaning will remove sound steel surrounding corroded areas. The risk of grit inclusion resultant from blast-cleaning, has been proven to cause early coating failure, corrosion and mechanical wear.
Slag-based blast cleaning media all contain heavy metals which when used in open-nozzle blast-cleaning equipment give off dust that may contain harmful levels of these elements.
The use of Deox-Gel will eliminate the risk of distortion to thin steel sections, which can result from the blast-cleaning process.
| Product number: | BH-DEOX-GEL |
|---|
- Deox-Gel is a thick paste designed to create a deep coating that de-rusts items too
big to soak in a Deox-C bath. - Here a brush is used to smooth the Deox-Gel across the rusted surface, although a
spatula or piece of cardboard are excellent to use. The gel MUST remain in a thick even
layer; brushing out to a thin coat must be avoided.
For very large areas pressure pot spray systems can be used. - The applied Deox-Gel is covered with plastic wrap to assist in the retention of moisture –
heavy corrosion needs a long dwell time and the product must not dry out. - After 12 hours undisturbed the plastic film can be removed – the gel has darkened
through corrosion absorption. A steel rule is used to push back the gel layer, demonstrating
the effectiveness of Deox-Gel. - After a scrub with a stiff plastic-bristled brush and plenty of water the treated area is clean
and ready for protection.
2 reviews
Bruut effectief
Ik gebruik de gel op roestige uitlaatmoeren, fuseedelen, vastgeroeste boutjes, dat soort ongein. En het werkt als een tierelier. De roest verdwijnt, zonder het goede staal aan te vreten. Voor zowel de detailer als de thuissleutelaar is dit spul goud en scheelt je liters kruipolie, vloeken, en afgebroken bouten.
gel besteld en is snel geleverd, werkt prima, smeert makkelijk en pakt de roest pitjes goed aan .
goed spul, wel eerst zoveel mogelijk roest mechanisch weghalen, daarna 1 of meerdere keren met de gel behandelen ,werkt diep in de porien.
Shared on our socials.
