Skip to main content Skip to search Skip to main navigation
Product categories

Foam Pro 2 Alk handfoamer - 1250ml

Art. nr. 8.16.86
5.0 (1)

Product information

IK Foam Pro 2 Alk - Powerful foam for stubborn dirt

The IK Sprayers IK Foam Pro 2 Alk is a professional pump sprayer specifically designed for applying alkaline cleaning agents. This device generates a thick, long-lasting foam layer, perfect for cleaning vehicles, engines, and heavily soiled surfaces. The foam clings well to dirt, loosening it effectively.

Thanks to special seals, this sprayer is fully resistant to aggressive, alkaline chemicals with a high pH value. However, this model is not suitable for acidic products. The wide filling mouth and sturdy base provide great stability during refilling and placement. Special felt strips are also included to perfectly adjust the foam generation to the chemical used.

Product number 8.16.86
Geschikt voor alkalische producten Ja
Spray pattern Foam
Volume Compact (≤ 2 Liter)

  1. Unscrew the spray head from the bottle.

  2. Fill the tank with water and an alkaline cleaner up to a maximum of 1.25 liters.

  3. Screw the spray head firmly back on.

  4. Pump until the safety valve starts releasing air.

  5. Aim at the surface and press the trigger.

  6. Always release the pressure via the valve after use.

Tips

  • Flush the spray bottle thoroughly with clean water after use to prevent clogging and wear.

  • Swap the standard white felt in the nozzle for the grey felt when using extremely alkaline products (pH 11-14).

Manufacturer
Goizper Group
Calle Antigua 4
20577 Antzuola, Spanje

Product reviews

Write your review

0.0 5.0 4.0 3.0 2.0 1.0
Please enter at least 5 characters.
Please enter at least 40 characters.

Goed alternatief voor foam canon

Prima hand-foamer.
Geschikt voor kleine oppervlakten. Zelf gebruik ik het voor mijn motorfiets. Iets te kwetsbaar om dit met een HD spuit uit te voeren. Het vergt wel wat inspanning om de foamer op druk te zetten. Je moet blijven oppompen, totdat het ventiel een pufje geeft. Dan is de foamer op druk en geeft deze een mooie schuimlaag. Resultaat is echt indrukwekkend. Voor het gebruik bij een auto vind ik het toch iets te bewerkelijk. Maar het kan wel. Nog een groot voordeel is het minimale gebruik van chemicaliën. Een foam-canon verbruikt uiteraard veel meer.
Al met al een prima alternatief als er geen HD spuit met foam canon beschikbaar is of niet gebruikt kan worden.
Degelijkheid van het apparaat is ook prima en met de reserve filtertjes kun je een aardige tijd vooruit. Geld dubbel en dwars waard.

Martin - 6 June 2026

Shared on our socials.

Our #CleanRiders in action